Protecting the global fleet with Jotun’s advanced anti-fouling and onboard maintenance solutions, backed by QPS’s on-site technical expertise.
Premium anti-fouling technologies designed to lower frictional resistance and drastically reduce fuel consumption and carbon emissions.
Together with Jotun, our NACE-certified inspectors provide on-site surface prep reports, DFT readings, and complete job sign-offs.
A reliable, single-source supply of essential maintenance coatings for vessels currently at sea.
Surface-tolerant epoxy mastic
A multi-purpose, two-component epoxy mastic primer built for surface tolerance and high film build; ideal where optimum blasting isn’t possible. It bonds to carbon steel, galvanised and stainless steel, aluminium and aged coatings, can be applied at sub-zero temperatures, and protects above and below the waterline as a primer, midcoat or single-coat system.
Abrasion-resistant epoxy mastic
A high-solids, high-build epoxy mastic that adds abrasion resistance and long-term protection in highly corrosive and immersed environments. Surface-tolerant and tintable across a wide colour range through Jotun’s Multicolor Industry (MCI) system, it works as a primer, midcoat, finish or single-coat over steel, aluminium and concrete.
Fast-dry pure epoxy
A two-component pure epoxy that combines high build and abrasion resistance with fast dry-to-handle times for efficient newbuilding and maintenance. Available in standard and quick-dry grades, its high flexibility suits the temperature swings seen on crude, chemical and shuttle tankers, and it performs throughout a system — primer to finish — in atmospheric and immersed service.
Wide-adhesion outfitting epoxy
A pure epoxy outfitting primer engineered for outstanding adhesion across an unusually wide range of substrates; carbon and stainless steel, aluminium, galvanised steel, GRP and thermally sprayed zinc. With service temperatures spanning cryogenic (-196 °C) to 210 °C and water-ballast-tank approval as a holding primer, it can be used as primer, midcoat, finish or single-coat in atmospheric and immersed areas.
Fast-drying high-build epoxy
A fast-drying, high-solids, high-build epoxy primer designed for newbuilding where short dry-to-handle and overcoating times keep projects moving. It protects steel, aluminium, galvanised steel and concrete in aggressive C4 and C5 atmospheres, and is equally at home on offshore structures, bridges, buildings and industrial steel.
Quick-dry alkyd primer
A one-component, zinc-phosphate alkyd primer that needs no mixing and dries hard in around 90 minutes, cutting waste and speeding up handling. Surface-tolerant and easy to apply by spray, brush or roller direct to steel, aluminium or wood, it’s an efficient choice for engine rooms, decks, superstructures and general industrial steelwork.
High-build epoxy intermediate
The same fast-drying Penguard Express epoxy also performs as a high-build intermediate coat, adding film thickness and barrier protection between primer and topcoat. Its short recoat times make it efficient to build a robust, corrosion-resistant system in atmospheric environments up to C5.
MIO-reinforced epoxy midcoat
A fast-drying, high-build epoxy reinforced with micaceous iron oxide (MIO) for enhanced barrier protection as a midcoat in demanding atmospheric conditions. The lamellar MIO pigment strengthens the coating film, making it well suited to structural steel and piping across offshore, refinery, bridge and industrial settings.
Zinc-phosphate epoxy
A fast-curing, high-build epoxy pigmented with zinc phosphate for active anti-corrosive performance in atmospheric environments. Usable as a primer or midcoat and able to be applied down to sub-zero surface temperatures, it’s a dependable layer for steel structures exposed to corrosive conditions.
Vinyl epoxy tie coat
A two-component vinyl epoxy tie coat that bonds epoxy primer systems to antifouling and also seals over existing antifouling. Effective in atmospheric and immersed service over approved primers on aluminium, carbon, galvanised and stainless steel, it can be applied at sub-zero temperatures and gives self-polishing antifoulings a strong, reliable foundation.
Flexible direct-to-metal polyurethane
A two-component aliphatic acrylic polyurethane topcoat with a glossy, colour-stable finish and exceptional flexibility and impact resistance. A hybrid binder and built-in anti-corrosive pigments allow direct-to-metal, single-coat use in C2–C3 environments, while high build and fast drying let coated items be stacked and handled sooner.
All-round polyurethane topcoat
Jotun’s go-to high-solids polyurethane topcoat, delivering a durable, glossy finish with excellent colour and gloss retention over epoxy systems in aggressive atmospheres. Low dry-spray and very good flow make it predictable and easy to apply by airless spray, brush or roller, and it’s tintable across a full colour range including most RAL and BS shades.
Quick-dry alkyd topcoat
A fast-drying, one-component urethane-modified alkyd topcoat that needs no mixing and delivers an attractive semi-gloss finish. Quick to handle and easy to apply, it suits engines, topsides, decks and superstructures, as well as touch-up work across a wide range of industrial steelwork.
Easy-apply alkyd topcoat
A one-component, glossy alkyd topcoat prized for its simplicity; no mixing, no pot-life limits, and ready application by brush, roller or spray on both new and aged coatings. Available in a full assortment of colours with good gloss retention, it’s a cost-effective finish for topsides, decks, superstructures and general industrial structures.
Direct-to-metal acrylic primer-finish
A one-component, fast-drying acrylic that works direct to metal as a combined primer and matt finish, with high build and good colour retention. Applied by brush, roller or spray; even at sub-zero surface temperatures; it’s ideal as a one-coat solution and for touch-ups on steel containers, cladding, modular buildings and large industrial equipment.
Self-polishing antifouling
A one-component, self-polishing antifouling built on Jotun’s Hydractive Technology™, which controls biocide release and leach-layer development for steady, low-friction performance. A triple-biocide package supports docking intervals of up to 60 months, giving reliable fouling protection for newbuilding and drydocking on prepared steel and aluminium hulls.
Premium self-polishing antifouling
A step up from Seaforce Active, this one-component hydrolysing antifouling pairs Hydractive Technology™ with a premium triple-biocide package for docking intervals of up to 90 months. Its self-polishing, low-friction surface minimises hull deterioration and speed loss across vessels of varying speed and activity.
Cost-efficient antifouling
A one-component, high-solids hydrolysing antifouling using proven ion-exchange technology and a SMART biocide release mechanism for dependable, value-driven protection. Suited to a wide range of vessels in drydocking, it offers up to 60 months on the flat bottom and boot top, and up to 36 months on the lower vertical sides.
Silyl acrylate antifouling
Jotun’s premium, chemically hydrolysing silyl acrylate antifouling, engineered for highly predictable self-polishing and ultra-low friction with verifiable low speed loss. Tailored to low- and medium-activity vessels and slow steaming, its broad-spectrum biocide package delivers long-term fouling protection and meaningful fuel and emissions savings.
Supplying one of the world’s best paints is only half the job. With Jotun’s 100 years of coatings expertise behind us, Quality Paint Supplies (QPS) ensures your marine coating performs exactly as engineered. In partnership with Jotun’s technical network, our hands-on experts provide:
Tailored specifications from surface preparation to the final coat.
Accurate DFT (Dry Film Thickness) readings and reference area checks.
Transparent reporting leading to complete dry-dock job sign-offs.
Speak to our technical marine specialists today for project-specific specifications and supply quotes.
Product